No products were found matching your selection.
Other Related Products
-
A plastic film specified for electronics shipping should be approved against the actual contact surface, the role it plays in the ESD packaging system, and the condition expected at final removal. This guide applies to display modules, touch panels, HMI assemblies, printed overlays, coated housings, and other finished electronic products exposed to handling, storage, road, air, or sea transport. The main risks are scratching, trapped contamination, edge lift, film movement, charge generation, adhesive transfer, haze, coating disturbance, and difficult removal after extended dwell. Approval should therefore combine surface identification, packaging review, staged sample testing, transport simulation, and post-removal inspection rather than relying on one datasheet value.
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
- Material: Biaxially oriented polyester (BOPET)
- Thickness: Available in custom thicknesses ranging from 0.05mm to 0.5mm
- Color: Clear, with options for custom tinting
- UV Resistance: High-level UV blocking and stabilizer additives
- Durability: Excellent resistance to weathering, chemicals, and abrasion
- Applications: Suitable for outdoor signage, protective overlays, and solar back sheets
-
- Material: PET / BoPET polyester film
- Common thickness: 12–250 microns
- Color options: clear, milky white, matte, black
- Surface options: plain, corona treated, coated
- Supply format: jumbo roll, slit roll, sheet, die-cut
- Main uses: insulation, laminates, labels, protection
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: PE protective film
- Common thickness: 30–100 microns
- Standard colors: clear, blue, black & white
- Adhesion level: low to medium tack
- Typical widths: 200–1600 mm
- Main use: temporary appliance surface protection
-
- Thickness: 50–180 microns
- Material: PE temporary surface protection film
- Adhesion: Low to medium removable system
- Color: Clear, blue, milky white
- Width: 100–2000 mm
- Application: Glass panels, windows, facade systems
-
- Material: PET polyester film
- Color options: clear, matte, white, black, or custom
- Common thickness: approx. 25–250 microns
- Supply format: die cut pieces, kiss-cut sheets, or roll form
- Adhesive option: single-sided, double-sided, or non-adhesive
- Liner option: paper liner, film liner, or differential release liner
-
Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.
