No products were found matching your selection.

Other Related Products

  • Pe Screen Protection Film

    • Material: PE film
    • Color: Clear, blue, or milky white
    • Adhesive: Low-tack acrylic
    • Typical Thickness: 50–100 μm
    • Supply Form: Slit rolls or larger rolls
    • Main Use: Temporary screen surface protection
    Read moreDone

  • COF of PET Film

    COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…

    Read moreDone

  • Transparent PET Film

    • Material: Polyethylene Terephthalate (PET)
    • Color: Transparent, Clear
    • Thickness: Ranges from 0.025mm to 0.5mm
    • Width: Customizable according to client requirements
    • Application: Used for packaging, insulation, graphics, and protective films
    • Packaging: Roll, sheet, or customized packaging options available
    Read moreDone

  • Release Coating Polyester Film

    • Material:PET polyester film
    • Coating side:Single side, double side, or differential A/B side
    • Coating system:Silicone, non-silicone, or fluoropolymer release coating
    • Thickness:25–188 μm common range
    • Color:Clear, translucent, milky white, or customized appearance
    • Release force: 3–150 gf/in, adjusted by adhesive system
    Read moreDone

  • Protective Film for Aluminium Composite Panel

    • Material: Polyethylene (PE) base film
    • Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
    • Thickness: 30–120 microns range
    • Colors: Transparent, blue, black & white
    • Widths: 200–2000 mm customizable
    • Roll Lengths: 100–2000 m per roll
    Read moreDone

  • Plastic Film For Injection Molding

    • Material: PC, PE, PMMA, or multi-layer film
    • Finish: gloss, matte, textured, anti-glare, or printed
    • Color: clear, tinted, white, black, or custom
    • Thickness: selected by forming depth and geometry
    • Process: printing, thermoforming, trimming, and back-injection
    • Use: IMD, FIM, HMI panels, trim parts, and decorative housings
    Read moreDone

  • Pa Pe Thermoforming Film

    • Thickness: 60–300 μm
    • Width: 200–1000 mm (custom slit widths available)
    • Structure: PA/PE, PA/EVOH/PE multilayer
    • Color: High clarity, optional light tint
    • Process: Thermoforming, vacuum packaging, MAP
    • Surface: Corona treated / printable
    Read moreDone

  • PET Film for Heat Transfer Printing

    • Material: Coated PET / polyester film
    • Common Thickness: 75μm, 100μm, 125μm
    • Surface: Matte, semi-matte, or clear coated
    • Peel Type: Hot peel, cold peel, warm peel
    • Width Range: 30cm, 60cm, 1,000mm, custom slit widths
    • Main Use: Heat transfer carrier film for industrial printing and decoration
    Read moreDone

  • Release Liner For Silicone Adhesive

    • Material: Fluoro-silicone coated PET film
    • Color: Clear, milky white, or customized tone
    • Thickness: 50μm, 75μm, 100μm, custom thickness available
    • Release side: Single-side or differential release
    • Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
    • Key function: Clean release with controlled peel force
    Read moreDone