No products were found matching your selection.
Other Related Products
-
- Common thickness: 12–250 microns
- Material type: PET / polyester film
- Color options: clear, white, black, matte, translucent
- Supply format: rolls, sheets, kiss-cut parts, full-cut parts
- Surface structure: plain, coated, adhesive-backed, liner laminated
- Typical uses: insulation parts, overlays, stencil film, masking, custom components
-
- Material:Glassine paper, kraft paper, PE coated paper, or PET film
- Color:White, yellow, blue, clear, or custom color
- Thickness:Paper 40–120gsm; PET film 25–75μm
- Release Side:One-side or two-side silicone coating
- Format:Jumbo roll, slit roll, sheet liner, or custom width
- Use:Sticker rolls, kiss-cut sheets, printed stickers, and labels
-
- Material: Polyester (PET) base film
- Surface: Scratch-resistant or hard-coated
- Thickness: Common custom range 20–120 μm
- Finish: Clear, matte, or anti-glare optional
- Adhesion: Controlled low, medium, or high peel
- Supply Form: Roll, sheet, or die-cut parts
-
COF of PET film is used to describe the friction behavior of polyester film surfaces during starting and sliding contact. In technical data, it is typically reported as static COF and kinetic COF under a defined method such as ASTM D1894 or ISO 8295. Public PET and polyester film datasheets show that reported values vary by grade, surface, and…
-
- Material: PE or co-extruded PE film
- Color: clear, blue, milky white
- Adhesion: low-tack or medium-tack
- Thickness: 25um-120um
- Width: slit to panel size
- Use: MDF and furniture panels
-
- Material: PC, PE, PMMA, or multi-layer film
- Finish: gloss, matte, textured, anti-glare, or printed
- Color: clear, tinted, white, black, or custom
- Thickness: selected by forming depth and geometry
- Process: printing, thermoforming, trimming, and back-injection
- Use: IMD, FIM, HMI panels, trim parts, and decorative housings
-
- Material: PE or PET protective film
- Color: clear, translucent, black & white
- Thickness: 50–100 microns typical
- Adhesive: water-based acrylic or acrylic PSA
- Width: custom slit rolls and sheet formats
- Use stage: fabrication, transport, installation, renovation
-
- Material: PE or PET protective film
- Color: clear or translucent
- Adhesive type: removable PSA
- Surface focus: overlays and display windows
- Process fit: printing, die cutting, lamination
- Main purpose: temporary surface protection
-
- Material: Polyethylene (PE) base film
- Adhesive Type: Water‑based acrylic / pressure‑sensitive adhesive
- Thickness: 30–120 microns range
- Colors: Transparent, blue, black & white
- Widths: 200–2000 mm customizable
- Roll Lengths: 100–2000 m per roll
