No products were found matching your selection.
Other Related Products
-
- Material: Nano hybrid glass composite
- Surface: Clear, smooth, oleophobic
- Hardness: 9H pencil hardness
- Adhesive: Full-area silicone layer
- Formats: Sheets, blanks, die-cut parts
- Uses: Mobile, automotive, industrial displays
-
Plastic film for appliance touch controls is used to protect appearance-sensitive interfaces while glass, printed overlays, display windows, decorative panels, and surrounding housings move through manufacturing. The challenge is not simply preventing scratches. A film can introduce a new problem if its adhesion is mismatched, contamination is trapped beneath it, an edge lifts near a cutout, or the temporary layer changes a capacitive touch check. This solution focuses on surface identification, controlled application, sample validation, film-on versus film-off functional checks, planned removal, and failure diagnosis before full production use.
-
- Material:BOPET / polyester film
- Finish:Super matte, low gloss
- Thickness:12–100 μm, common range
- Width:500–2050 mm, slit roll available
- Color:Clear, translucent, white, or matte metallized
- Use:Printing, lamination, labels, packaging, decorative surfaces
-
Conventional PET and BOPET films commonly show a polyester film melting temperature of about 245-260 C by DSC. The reported onset, peak, or endset varies with grade, orientation, thermal history, and scan conditions. Use it for base-film identification, not as a finished-film service limit. Confirm adhesive, coating, surface, dwell, and removal behavior under intended conditions.
-
- Material: Fluoro-silicone coated PET film
- Color: Clear, milky white, or customized tone
- Thickness: 50μm, 75μm, 100μm, custom thickness available
- Release side: Single-side or differential release
- Adhesive match: Silicone PSA, silicone tape, soft medical gel adhesive
- Key function: Clean release with controlled peel force
-
Plastic films for flooring industry applications should be selected around the actual finish and process stage, not simply because a surface is called hard flooring. Laminate, embossed SPC or LVT, ceramic tile, and sealed stone can react differently to temporary adhesive contact. This solution covers production, handling, transport, installation, and planned removal. Key risks include scratches, trapped contamination, edge lift, film movement, adhesive transfer, haze, and surface change. Selection should consider texture, coating condition, dwell time, environment, traffic, removal timing, and actual trial results.
-
- Material: Polyethylene (PE) protective film
- Thickness: 30–100 microns (custom available)
- Adhesion: Low to medium tack, surface-adjustable
- Color: Transparent, blue, black/white, custom colors
- Width: 50mm–1200mm (custom slitting supported)
- Length: 50m–2000m (jumbo roll supply available)
-
- Material: Electrical grade PET film / polyester film
- Thickness:25–350 micron
- Color:Clear, white, black, blue, or custom color
- Surface:Smooth, corona-treated, coated, or laminated
- Format:Jumbo roll, slit roll, sheet, strip, die-cut part
- Use:Motor, transformer, coil, cable, battery, electronics
-
- Material: Removable PE film with acrylic adhesive
- Color: Clear, blue, black and white, or printed
- Thickness: Commonly 30-80 um; extended grades subject to review
- Width: Custom slit widths for panel lines
- Roll format: Machine-length or jumbo rolls
- Surfaces: MDF, melamine, cabinet, and decorative boards
