PET Film Supply Company is a custom converted PET film supplier for projects that need more than standard PET stock. We process customized clear polyester pet film into slit rolls, cut sheets, windows, insulation pieces, adhesive-backed parts and precision-cut components from drawings or approved samples. Each format is prepared for the next production step, with dimensions, edge condition, liner presentation and repeat-order consistency considered before volume processing.
Showing all 2 results
This category covers PET film converting into roll, sheet and component formats for coating, die cutting and assembly. Width is only the starting point. Film gauge also changes stiffness, roll build, sheet handling, and cutting behavior, so the PET film gauge selection guide should be reviewed before the final roll or component specification is approved. When polyester based PET film customized for downstream processing enters production equipment, core ID, winding direction, part pitch, adhesive side and delivery form can affect feeding, peeling and handling. Confirming these details early reduces setup changes and avoids samples that fit the drawing but fail on the line.
Available formats include slit-to-width rolls, cut sheets, insulation pieces, die-cut spacers, washers, clear windows, frames and adhesive-backed components. Internal details can include holes, slots, rectangular openings, rounded corners and custom cutouts. Plastic film laser cutting is useful for prototypes and complex outlines before tooling approval. For repeat orders, thin film die cutting supports stable pitch, controlled waste removal and consistent part presentation. Punched holes and windows should be checked for burrs, edge whitening and positional deviation during trials.
Choose slit rolls for lamination, coating or roll-fed cutting. Choose sheets when flatness, fixed dimensions and stacking matter. Laser cutting suits prototypes, small holes and outlines that may still change. Flatbed die cutting is practical for moderate quantities or larger parts. Rotary die cutting suits repeat roll-to-roll production. Kiss cutting is the usual choice when adhesive-backed parts must remain on a carrier liner. Before sampling, confirm hole-to-edge distance, adhesive side, liner consistency, peel direction, core size and final delivery format.
A trial starts with a 1:1 PDF, DXF file or confirmed sample. The drawing should show thickness, outside dimensions, windows, hole diameter, corner radius, adhesive side, tolerance and quantity. For roll-form parts, confirm pitch, winding direction, core ID and whether surrounding waste should be stripped. Record slit-width variation, sheet flatness, burr condition, edge whitening, hole-position deviation, laser heat marks and liner release behavior. These results become the repeat-production reference.
Item | Typical Range / Customizable Value |
Base Material | Clear polyester PET film; grade confirmed by application |
Thickness | Confirm by drawing, rigidity, shape and cutting method |
Supply Format | Master roll, slit roll, sheet, pad, kiss-cut roll, kiss-cut sheet or individual part |
Roll Parameters | Width, length, core ID, roll diameter and winding direction customizable |
Sheet Parameters | Length, width, stacking method and flatness requirement customizable |
Shape Options | Rectangle, circle, washer, spacer, frame, window and custom outline |
Internal Features | Hole, slot, cutout, window, perforation and rounded corner |
Cutting Method | Slitting, sheeting, laser cutting, rotary die cutting, flatbed die cutting, punching or kiss cutting |
Dimensional Tolerance | Confirm by geometry, hole layout and process; verify on trial sample |
Adhesive Structure | Without adhesive, single-side adhesive or double-side adhesive |
Liner Presentation | Standard liner, split liner, extended liner, pull tab or perforated liner |
Waste Handling | Matrix stripping for surrounding waste removal; slug removal where design allows |
Drawing Input | 1:1 PDF, DXF or approved physical sample |
Quality Checks | Slit-width variation, hole-position deviation, burrs, edge whitening, thermal marks, flatness and liner release |
Repeat-Order Control | Retain approved drawing version, liner format and delivery presentation |
Delivery Form | Roll form, sheet form, pads, stacked parts or individual pieces |
PET Film Supply Company can convert a customized adhesive film roll with the PET carrier, adhesive side and liner format matched to the assembly method. Options include single-side or double-side adhesive, split liners, extended liners, pull tabs and perforated liners. We also confirm part spacing, peel direction, matrix removal, roll core and winding direction. Parts can be supplied in rolls, sheets, pads or individual pieces. A new trial is recommended when thickness, shape, adhesive structure, liner format or cutting method changes. Projects with buttons, meter windows, and printed borders can also review the recommended protective film layout around panel controls.
Use kiss cutting when adhesive-backed parts must remain on a liner. Use laser cutting for prototypes, intricate outlines and low-volume projects. Use rotary die cutting for repeat orders requiring continuous feeding, consistent pitch and stable matrix stripping. Trial cutting still matters. Inconsistent liner thickness or incorrect cutting depth can cause incomplete separation or unstable waste removal. A blade that cuts too deeply into the carrier liner can also leave die strike marks.
Yes. Available formats include slit rolls, sheets, kiss-cut rolls, pads and individual components.
A 1:1 PDF or DXF drawing is preferred. A confirmed physical sample can also be used.
Yes. Single-side or double-side adhesive, split liners, extended liners, pull tabs and perforated liners can be discussed for the assembly process.
Prepare a new trial when thickness, part geometry, adhesive structure, liner format or cutting method changes. The revised sample should be checked for fit, edge quality, liner release and repeatability before volume processing.