Laminate Floor Protection Film
- Material: PE film with removable acrylic adhesive
- Thickness: 50 um, 60 um, 80 um, 100 um
- Width: 600 mm, 900 mm, 1200 mm, or slit width
- Color: clear, blue, milky white, or printed
- Adhesive: low tack 25-60 g/25 mm or medium tack 60-120 g/25 mm
- Use: protects laminate planks during installation and handover
PET Film Supply Company is a manufacturer of laminate floor protection film for temporary protection of laminated flooring during handling, transport, installation, renovation, and final handover. The film is made for laminate surfaces with a clear wear layer, printed wood-grain decorative layer, matte or gloss finish, and lightly embossed texture. Its 50-100 um PE film and removable acrylic adhesive help reduce scratches, dust, shoe marks, paint mist, and surface contamination while allowing clean peeling after 24-72h sample testing.
Product Overview
Laminate flooring needs a more careful covering choice than a general hard floor. Its surface is usually a printed decorative layer under a transparent wear layer. The wear layer helps resist light abrasion, stains, and cleaning marks, while the printed layer gives the plank its wood-grain appearance. If carton sliding, fine dust, shoe traffic, or tool contact marks the surface during installation, the mark may still be visible after final cleaning.
Different laminate finishes need different adhesive behavior. Smooth gloss planks can show adhesive shadow, haze marks, or peel outlines under strong indoor light, so low tack adhesive is normally the safer starting point. Matte planks hide light footprints better, but they still need stable film contact during fixture work, painting, or final cleaning. Lightly embossed surfaces need the film to follow the texture without trapping air pockets or increasing peel force after several days.
Benefits
- Helps protect the transparent wear layer from light scratches caused by shoes, cartons, tools, and short-term movement.
- Keeps printed wood-grain surfaces cleaner from dry dust, footprints, paint mist, and final cleaning residue.
- Uses low tack adhesive for gloss laminate where haze, adhesive shadow, or visible peel outline must be avoided.
- Provides medium tack 60-120 g/25 mm for matte or lightly textured planks that need stronger holding force.
- Helps reduce edge curling near bevels, plank joints, corners, and walking paths.
- Supports clean peeling from dry, fully cured laminate flooring within a typical 30-45 day indoor use period.
- Can be supplied with adjusted thickness, slit width, color, tack level, printed marks, and reverse wound rolls.
How should laminate floor protection film be tested before covering matte, gloss, or embossed planks?
Before covering a full room, test a small piece on the actual installed laminate floor, not only on a spare sample board. Choose a clean corner, plank joint, or bevel edge because these areas show lifting more easily. Leave the film for 24-72 hours, press it with normal hand pressure, and walk across the edge several times. On gloss laminate, check under strong indoor light after removal. Peel slowly at a low angle. The floor should show no adhesive transfer, gloss change, haze outline, pressure mark, or lifted film along the plank edge.
production line
TDS
Item | Typical Value |
Film material | PE protective film |
Adhesive type | Water-based removable acrylic adhesive |
Common thickness | 50 um, 60 um, 80 um, 100 um |
Thickness tolerance | +/-5 um typical |
Adhesive level | Low tack 25-60 g/25 mm, medium tack 60-120 g/25 mm |
Suitable surface | Fully cured laminate flooring wear layer |
Finish compatibility | Matte, gloss, and lightly embossed laminate surface after sample test |
Gloss surface check | Inspect haze mark, adhesive shadow, and peel outline under indoor light |
Embossed surface check | Check air pockets, texture contact, and lifting near plank joints |
Standard width | 600 mm, 900 mm, 1200 mm |
Custom slit width | 50-1500 mm |
Roll length | 100-500 m typical, custom length available |
Color options | Clear, blue, milky white, custom printed |
Tensile strength | MD 18-28 MPa typical |
Elongation at break | 250-450 percent typical |
Clean removal period | 30-45 days indoor, depending on surface and conditions |
Application temperature | 10-40 C |
Service temperature | -10 to 60 C temporary indoor use |
Residue inspection | Check adhesive transfer, haze mark, gloss change, and peel resistance |
Winding format | Standard wound or reverse wound roll |
Applications
- Covering installed laminate planks before final cleaning and project handover.
- Protecting laminate flooring during room painting, fixture installation, and finishing work.
- Short-term covering for matte laminate planks with mild surface texture.
- Low tack covering for gloss laminate flooring after haze, outline, and peel force testing.
- Protection of printed wood-grain laminate surfaces during staging and transport.
- Covering bevel edges and plank joint areas after confirming 72h lifting behavior.
- Factory handling, cutting, packing, and movement of laminated flooring panels.
What adhesive level works better for laminate flooring with a wear layer and decorative wood-grain surface?
The adhesive should keep the film flat without pulling too strongly on the wear layer. Low tack removable adhesive, typically 25-60 g/25 mm, is used for glossy, smooth, newly installed, or sensitive laminate flooring where clean peel removal is more important than high grip. Medium tack adhesive, typically 60-120 g/25 mm, is better when matte or lightly embossed planks face repeated walking, dry dust, or short-term construction work. For textured surfaces, the film should contact the high and low points of the grain enough to avoid air pockets, but it should not become difficult to peel after several days.
loading containers
FAQ
What is laminate floor protection film?
It is a temporary PE protective film with removable adhesive for finished laminate flooring surfaces.
Will it leave adhesive residue after removal?
It is designed for clean peeling, but a small surface test is recommended before full use.
Can it be used on gloss laminate flooring?
Yes. Low tack film and 24-72h testing are recommended to check haze, outline, and peel force.
Can thickness, width, color, and printing be adjusted?
Yes. Thickness, slit width, roll length, color, tack level, and printed marks can be adjusted.
